G9-A motorcycle phone holder with four-claw cradle and handlebar clamp

G9-A Motorcycle Phone Holder: Why an 8-Piece Damping Assembly Is Needed to Safeguard Your Phone on Bumpy Roads

Loading

Table of Contents

A high-quality motorcycle phone mount must accomplish something which sounds simple but is actually challenging: provide absolute stability to your device during thousands of miles of vibration, and make sure the phone screen is always easily visible without making riding an adventure of its own. Most bikers have realized the hard way that using a low-end motorcycle phone mount brings with it one additional undesirable consequence: excessive vibration which will damage your phone camera, blur out the picture and gradually cause any clamps used loosen up. The G9-A series is designed specifically to deal with this problem. This post explains how exactly the damping assembly of the G9-A works, the reliability of four-claw grip and CNC machined aluminum rear mount, and why a well-designed motorcycle phone mount is important both for navigating and touring.

The Mechanism Behind Why a Normal Phone Holder Doesn’t Work in Vibratory Environment

Before we get down to the reasons why G9-A differs from the conventional mounts, let us look into the problem that they share. Vibrations from the engine, from the road and from the handlebar are transmitted directly to the phone and usually there is no way for them to be dampened by the mount itself.

G9-A motorcycle phone holder with four-claw cradle and handlebar clamp

Engine Vibration and the Rattling Lens Issue

Modern phones have optical image stabilization and autofocus that uses magnetic actuators. If you ride a bike powered by a single-cylinder or parallel-twin engine your phone vibrates with its high frequency and the magnetic actuators wear down. In other words, the picture is getting blurred and the camera itself is rattling because vibrations are transmitted directly from the engine.

Loosening Is the Invisible Failure

The second failure type is the mechanical failure. Every vibration, every crack of the gas pedal and every passage over a railroad track slightly loosens the grip. Plastic knobs round off, screws loosen up and one day the phone hits the asphalt after the tracks of a tram. The grip which was tight in your driveway can become deadly on a gravel road one hundred kilometers away from home.

What Riders Really Need from a Mount

A mount which will survive the ride requires three things: a damping mechanism which separates the handlebars from the phone, a gripping mechanism which will tighten under the pressure and not loosen and a material which does not deteriorate from UV rays, rain and cold. All these were taken into account when making the G9-A.

How Does the G9-A 8-Point CNC Damping System Stop High-Frequency Vibration?

The main thing about the G9-A is its eight-point damping stack, which deserves to be described, as the marketing description does not say much about how it affects the experience of a rider.

Four-claw motorcycle phone mount illustrating its side and lower gripping points

Eight Contact Points and Not Eight Springs

The G9-A uses an eight-point silicone-damped mounting system with the rear mount made from CNC aluminum and the phone cradle with the same material in a radial arrangement. Each of these points uses a combination of aluminum puck and silicone air-bag dampers in order to dissipate vibrations rather than reflect them into the phone. The result is not a wobbly holder; instead, the phone remains stable, while the vibrations never reach the camera unit.

Eight Silicone Dampers Rather Than a Single Rubber Bushing

A single rubber bushing can absorb only a very narrow frequency band of vibrations. In the case of the G9-A, there are eight silicone dampers incorporated into the rear mount, covering more spectrum, starting from the low frequencies of engine vibrations and ending with high frequencies of the road noise. As a result, riders of single-cylinder motorcycles feel that there is a smoother picture on the navigation screen.

Why the Rear Mount Is Made of CNC-Machined Aluminum

The damping process occurs only in the case when the housing containing dampers does not deform. That is why the G9-A rear mount is made of CNC-machined aluminum rather than zinc or plastic. The use of aluminum ensures precise seating of eight dampers in the housing. Moreover, unlike plastic, aluminum does not creep, which means that the damping effect will not change during twenty thousand kilometers of riding.

Fit and Build: Four-Claw Hold, Aluminum Construction, and Handlebar Mounting

What’s the use of damping when the phone is still slipping? For that reason, the G9-A combines the damping system with the four-claw hold and an adjustable mount made to fit the handlebars of almost all produced motorcycles.

G9-A eight-point CNC damping system with silicone dampers and aluminum rear mount

Three-Sided Hold With a Tight-Loose Adjustment Knob

It holds the phone on three sides with four rubberized claws altogether, and the adjustable side button Tight and Loose allows tightening the grip instantly. Unlike spring clamps, this clamp is mechanically operated with threads, so the phone will not slip out due to bumpy road conditions. The phone rests are adjustable in height to fit any phone from 4.7 inches to 7.2 inches without sliding down or up.

Clamp for Handlebars Suitable for 22mm to 32mm Pipes

The provided handlebar clamp is designed for use with pipe diameters from 22mm to 32mm. This size applies to standard road bikes, most ADV bars, scramblers, and the majority of scooters. The clamp secures by a through-bolt instead of a plastic thumb screw, and an anti-loosening washer provides additional stability. For the owners of handlebars of different sizes, there is an option to replace the ball joint with another base mentioned below.

360 Degrees Rotation and Tension Adjustment

The ball joint between the clamp and the cradle allows full 360-degree rotation of the cradle, so it can be positioned either in a portrait mode for navigational purposes or in a landscape mode for entertainment purposes. It is possible to adjust the level of difficulty of rotation with the help of a tension dial, and the rider will secure the desired angle thanks to the friction knob. Additionally, the height adjustment of the cradle is also available.

Installation and Usage: Quick Release, Mount Bases, and Riding Realism

A mount that works well in photos but takes twenty minutes to install will stay in the box. The G9-A mount was created with ease of installation and use in mind for everyday riding situations.

One-Handed Quick Release

The mount cradle disengages from one quick push with a thumb. The rider can insert the phone in the mount easily and remove it once he parks the bike without any fuss. The lower support is designed to disengage at the same time as the upper one, allowing the phone with its case or pop sockets to fit in properly. The only control on the mount that requires turning by hand is the Close-Loose knob, which can be turned even with gloves.

Fifteen Optional Mounts for Every Bike

The G9-A incorporates the standard ball joint, thus becoming a mount which fits a multitude of optional bases: handlebar mount, mirror bar, mirror base adapter, crossbar, large tube clamp, M8 and M10 screw posts, brake reservoir mount, fork stem expansion base, and triple tree adapter mounts specific to CFMOTO, Ducati, QJMOTOR, VOGE, and ZXMOTO. This is how an ordinary handlebar mount becomes a mount that goes with the rider from a commuter bike to a track bike and to a touring one.

How the Product Works in Practice

In practice, the G9-A doesn’t float the phone. Navigation arrow stays clear and defined, the camera module does not vibrate, and the mount remains secure despite a week full of gravel riding. It weighs more than a typical plastic mount, as the extra damping and aluminum require more materials to be used, but it is this added weight that makes the difference between years of durability and warranty claims.

Conclusion

The choice of a motorcycle phone mount is often limited to the color and price; however, the most important aspect of such a mount is what goes between the handlebars and the phone. An inexpensive motorcycle phone mount transfers vibrations into the camera, loosens when riding over bumpy road and breaks down after a season of sun and rain exposure. The G9-A solves all of these problems with its eight-stage CNC damping stack, rigid aluminum back mount, thread-tightening four-claw mount system and universal ball-joint platform that can adapt to any available model of the bike on the market. If you are looking for a navigation system that is easy to see and a phone that will withstand vibrations from the engine for many years without vibrating the camera, the G9-A will not need any adjustments after installation. If you are planning to order a damped motorcycle phone holder for the next OEM/wholesale catalog line, the G9-A series by 360°rugged tablet case – Shuowei Technology is the quickest solution to test it.

FAQ

Is the G9-A Actually a Solution for the Phone Camera Vibration Problem?

Since high-frequency vibrations of the motorbike engine are dampened by the eight-point silicone damping stack, which is installed in front of the phone to protect it from those vibrations, the solution works. The vibration will not completely vanish but will drop to a level that will be tolerable for the camera module.

What Types of Phone Are Compatible with the G9-A?

Cradle is designed for 4.7 inch to 7.2 inch phones, and the lower rest part is height-adjustable for large phones with case on.

What Handlebar Diameters Does the G9-A Clamp Fit?

Standard clamp that comes with the unit fits the majority of roadsters, ADV bikes, scramblers, scooters’ handlebars with a diameter ranging from 22mm to 32mm.

Can I Transfer the G9-A from One Bike to Another?

Yes. Since the mount has a standard ball joint, you can remove it from the handlebar mount and attach it to an optional mirror, fork stem, brake reservoir, or triple-tree mount on another bike.

Is the G9-A Compatible With Off-Road and Gravel Cycling?

The threaded four-claw grip, anti-loosening clamp, and multi-point damping system make it compatible with rough roads and gravel riding. However, for deep off-road cyclists, a solid mounting base is recommended.